BanTech GT: la red nacional de un banco
La infraestructura de un banco con cuatro sedes y un Data Center, unidas por un backbone que sigue funcionando aunque caiga cualquier enlace del núcleo. Proyecto en grupo de tres para Redes de Computadoras 1: coordiné al grupo y construí el backbone, el Data Center y la Sede Central.
- Mi parte
- Coordinación, backbone, Data Center y Sede Central
- Equipo
- 3 personas · Redes de Computadoras 1, USAC
- Escala
- 112 dispositivos y 120 enlaces, red 10.49.0.0/16
- Protocolos
- OSPF, EIGRP, RIPv2, HSRP, EtherChannel LACP, Rapid PVST+
El problema
El banco tiene sedes con historias distintas: una expansión regional, un centro de autorización de créditos, un centro financiero heredado y la sede central con el Data Center. Cada una necesitaba su propio dominio de enrutamiento, todas tenían que llegar a los servidores, y la caída de un equipo del núcleo no podía partir la red.
Corta un enlace y mira cómo se reacomoda
El paquete fucsia es un ping desde la sede elegida hasta el servidor BD1. Corta enlaces del triángulo del núcleo y la ruta se va por el otro lado. Apaga el uplink de MS1 y su prioridad HSRP baja de 105 a 95, así que MS2 toma el gateway de Oriente, igual que en la prueba de alta disponibilidad del proyecto.
BanTech GT: a bank's nationwide network
The infrastructure of a bank with four sites and a Data Center, joined by a backbone that keeps working even if any core link fails. A team project of three for Computer Networks 1: I coordinated the team and built the backbone, the Data Center and the headquarters.
- My part
- Coordination, backbone, Data Center and headquarters
- Team
- 3 people · Computer Networks 1, USAC
- Scale
- 112 devices and 120 links, 10.49.0.0/16 network
- Protocols
- OSPF, EIGRP, RIPv2, HSRP, LACP EtherChannel, Rapid PVST+
The problem
The bank's sites have different histories: a regional expansion, a credit authorization center, a legacy financial center and the headquarters with the Data Center. Each needed its own routing domain, all of them had to reach the servers, and losing a core device could not split the network.
Cut a link and watch it reroute
The fuchsia packet is a ping from the chosen site to the BD1 server. Cut links in the core triangle and the route goes around the other way. Shut down MS1's uplink and its HSRP priority drops from 105 to 95, so MS2 takes over the East site's gateway, just like in the project's high-availability test.
Haz clic en cualquier enlace (o usa Tab y Enter) para cortarlo. Versión simplificada de la red real de 112 dispositivos.
Decisiones de diseño
- Un núcleo en triángulo. Tres switches multicapa 3650 conectados entre sí: es la forma mínima en la que cualquier enlace o equipo del núcleo puede fallar sin dejar a una sede aislada.
- EtherChannel de capa 3 con LACP. Cada lado del triángulo son dos fibras que funcionan como un solo enlace ruteado. Al ser capa 3 no hay Spanning Tree en el núcleo y la redundancia la resuelve OSPF. LACP es estándar y, a diferencia del modo
on, detecta si el otro extremo está mal configurado. - Un dominio de enrutamiento por sede. OSPF en el núcleo y en Norte, EIGRP 10 en Occidente, RIPv2 en el centro heredado de Oriente y rutas estáticas en la Sede Central. Cada dominio cuelga de un switch distinto del núcleo para repartir la carga de redistribución.
- Un solo punto de redistribución por cada par de dominios. R-WAN entre OSPF y EIGRP, CORE-3 entre OSPF y RIPv2, y R-CENTRAL1 de estáticas hacia OSPF. Con dos puntos entre los mismos protocolos una ruta puede volver a su dominio de origen y formar un bucle.
- Gateway redundante en Oriente. HSRP entre MS1 (prioridad 105) y MS2 (100), con seguimiento del uplink de MS1 y decremento de 10. Además, CORE-3 tiene un agregado estático de respaldo con distancia 251 para que el regreso no dependa de un solo anuncio de RIP.
Lo que encontramos al probar
En Packet Tracer 9.0.1 vimos que retirar uno de los dos caminos de igual costo de RIP podía retirar el anuncio OSPF de las redes de Oriente, aunque CORE-3 todavía tuviera el otro siguiente salto. El agregado estático de respaldo mantiene una ruta de regreso en ese escenario; las dos fallas se probaron por separado y la red siguió respondiendo.
Resultados
- 112 / 120dispositivos y enlaces en el maestro final, sin enlaces caídos ni IPs duplicadas
- 105 → 95prioridad de MS1 al perder su uplink: MS2 toma el gateway
- 4 dominiosOSPF, EIGRP, RIPv2 y estáticas conviviendo en una sola red
Pruébalo
- Descarga Cisco Packet Tracer 9.0.1 o superior (gratis con una cuenta de Cisco Networking Academy).
- Abre
Unido/BanTech_GT_v1.pktdel repositorio. - En CORE-1, CORE-2 o CORE-3 revisa
show ip routeyshow ip ospf neighbor; en MS1 y MS2,show standby brief. - Apaga
Gi1/0/1de MS1 y repite el ping desde Oriente hacia el Data Center: MS2 queda activo.
Design decisions
- A triangle core. Three 3650 multilayer switches connected to each other: the smallest shape where any core link or device can fail without isolating a site.
- Layer-3 EtherChannel with LACP. Each side of the triangle is two fibers working as one routed link. Being layer 3, there's no Spanning Tree in the core and OSPF handles redundancy. LACP is a standard and, unlike
onmode, detects a misconfigured far end. - One routing domain per site. OSPF in the core and the North, EIGRP 10 in the West, RIPv2 in the legacy East center and static routes at headquarters. Each domain hangs off a different core switch to spread the redistribution load.
- A single redistribution point for each pair of domains. R-WAN between OSPF and EIGRP, CORE-3 between OSPF and RIPv2, and R-CENTRAL1 from static into OSPF. With two points between the same protocols a route can leak back into its home domain and loop.
- A redundant gateway in the East. HSRP between MS1 (priority 105) and MS2 (100), tracking MS1's uplink with a decrement of 10. CORE-3 also has a backup static aggregate with distance 251 so return traffic doesn't depend on a single RIP advertisement.
What we found while testing
In Packet Tracer 9.0.1 we saw that removing one of the two equal-cost RIP paths could withdraw the OSPF advertisement for the East networks, even though CORE-3 still had the other next hop. The backup static aggregate keeps a return route in that scenario; both failures were tested separately and the network kept answering.
Results
- 112 / 120devices and links in the final master file, with no down links or duplicate IPs
- 105 → 95MS1's priority after losing its uplink: MS2 takes the gateway
- 4 domainsOSPF, EIGRP, RIPv2 and static routes living in one network
Try it
- Download Cisco Packet Tracer 9.0.1 or later (free with a Cisco Networking Academy account).
- Open
Unido/BanTech_GT_v1.pktfrom the repository. - On CORE-1, CORE-2 or CORE-3 check
show ip routeandshow ip ospf neighbor; on MS1 and MS2,show standby brief. - Shut down MS1's
Gi1/0/1and ping the Data Center again from the East site: MS2 becomes active.